Shop

Showing all 8 results

  • HAMMERSPIKE Shield Scabbard

    $85.00

    For use with our proprietary Hammerspike tool.  This Scabbard was designed to fit on the interior of the majority of ballistic shields used by departments around the country.  It allows the end user to have the tool readily accessible during critical incidents.  Panel attaches via industrial grade velcro (included).  Tool attaches via S.T.R.Ap Shock cord.

    The HAMMERSPIKE Shield Scabbard is made exclusively for Shieldspike LLC by Grey Man Tactical

  • Minispike

    $65.00$90.00

    ‘-The Minispike is a last ditch/expedient window breaker that is lightweight and small enough to stow on your vest or in cargo pocket,weighing in at 9 oz. and 7 inches in length.

    -We used the same breaking tip technology to effectively penetrate glass and paracord wrapped the handle to help the end user hold onto the tool during breaching.

    -Pair this tool with a retractable lanyard and you have a window breaking system that will always be accessible to you in critical situations.

    -Available in four paracord wrapped colors
    -Black
    -OD Green
    -Coyote Brown
    -Storm Grey

    ORDERING OUTSIDE THE U.S. PLEASE CONTACT VIA EMAIL AT:  Chris@shieldspike.com OR CALL DIRECT (623)570-3929

  • HAMMERSPIKE

    $135.00

    The Hammerspike replaces heavier breaching tools requiring two hands to operate and never designed to effectively penetrate vehicle or structure glass.

    • This tool replaces heavier breaching tools requiring two hands to operate and never designed to effectively penetrate vehicle or structure glass.
    • The tool’s dimension and weight allow the operator to seamlessly integrate the use of a ballistic shield during breaching, thus promoting team efficiency.
    • The tool’s design is based off the principle of economy of motion.  Small swinging motions will break the glass.
    • The breaking tip allows the operator to strike the window in any location to achieve a successful breach.
    • The operator’s hands are kept away from breaking glass preventing injury.
    • The HammerspikeTM can be mounted onto molle via the Mollespike kydex carrier.
    • Available in high speed black of course…

     

    ORDERING OUTSIDE THE U.S. PLEASE CONTACT VIA EMAIL AT:  Chris@shieldspike.com OR CALL DIRECT (623)570-3929

     

  • HAMMERSPIKE XL BREAK N RAKE

    $355.00
    • The Hammerspike XL was designed around intuitive hand placement and positioning utilizing a dual grip system to drive the tool.
    • The Hammerspike XL gives the operator five and a half feet of standoff allowing the operator to safely off set their position in relation to the target window.
    • Aggressive ¼ inch steel raking teeth and the tool’s 90 degree bend allows for efficient window clearing.  Double pane industrial glass has proven no match for the Hammerspike XL.
    • The same breaking tip technology was integrated into the Hammerspike XL.  Strike the window with the breaking tip, in any location to produce a one hit positive breach.
    • A nasty steel dorsal fin/reverse hook was added to give the operator the ability to quickly remove interior shutters and blinds eliminating any visual obstructions. Dorsal fin also incorporates a breaking point
      angled at it’s highest point for spearing glass through security bars
    • Weighing in at just over seven pounds, it provides less burden on the breacher.
    • Now comes standard in a two piece break down configuration for easier portability!

    Coated in high speed black of course…..

     

    ORDERING OUTSIDE THE U.S. PLEASE CONTACT VIA EMAIL AT:  Chris@shieldspike.com OR CALL DIRECT (623)570-3929

     

     

  • SHIELDSPIKE-OUT OF STOCK/CALL FOR DETAILS

    $185.00
    • Allows the operator to use a ballistic shield to cover their neck and face during a vehicle window breach.
    • The tool’s design and positioning keeps the operators hands away from the glass preventing injury.
    • Promotes team efficiency by integrating the ability of an operator to maintain cover with a ballistic shield while simultaneously performing a window breach.
    • Promotes the principle of economy of motion. Striking a window with the ShieldspikeTM is a more efficient gross motor movement than swinging a pry tool or baseball bat. In a CQB environment, such as vehicle hostage rescue or a barricaded individual in a vehicle, large swinging motions by breachers can be hazardous.
    • Works best on sturdy ballistic shields with minimal flex

     

     

  • Hammerspike CET (Crisis Entry Tool)

    $355.00

    The Hammerspike Crisis Entry Tool is the latest in the Hammerspike breaching tool line. Designed to punch through  and remove laminate and lexan glass, the toughest glass on the market used for buses,light rail,commercial building and high end vehicles.  This is the one tool for active shooter situations, small enough to be stored in a patrol vehicle trunk.

    -Weighs in at 5.5 lbs & under 3 feet in length.

    -Designed for close quarters window breaching.  The three breaking tip and 1/4″steel alloy angled plate design, replaces the sledge/haligan tool.

    -The Hammerspike Crisis Entry Tool falls in line with everything we build.  This is true breaching efficiency through minimizing weight and   purposeful design.

    ORDERING OUTSIDE THE U.S. PLEASE CONTACT VIA EMAIL AT:  Chris@shieldspike.com OR CALL DIRECT (623)570-3929

  • Hammerspike L1

    $335.00

    With the ever increasing use of laminate windows on vehicles, the Hammerspike L1 was designed to break and push through laminate glass. This breaching tool is well suited for all glass breaking situations with a focus of porting laminate glass when present.

    The Hammerspike L1 is designed to provide to provide maximum penetration with minimal effort.

    • All steel construction for breaching longevity
    • The ninety degree bend in the tool’s shape allows the end user to off-set their position in relation to the target window.
    • A true one handed tool designed for maximum leverage and penetration.
    • Hardened steel breaking tip
    • Lightweight by design, weighing in at TWO pounds, it provides less burden on the end user.
    • Coated in high speed black of course!

    PRINTABLE .pdf FLYSHEET

    ORDERING OUTSIDE THE U.S. PLEASE CONTACT VIA EMAIL AT:  Chris@shieldspike.com OR CALL DIRECT (623)570-3929

  • Hammerspike LT (Laminate Tool)

    $395.00

    The Hammerspike LT is designed to provide maximum penetration and cutting with minimal effort against laminate type glass.

    • All Steel construction for breaching longevity
    • The ninety-degree bend in the tool’s shape allows the end user to off-set their position in relation to the target window.
    • Two-handed grip position for maximum leverage, penetrating and cutting
    • Hardened tool steel breaking tip and 1/4″ thick serrated blade edge for added durability
    • Lightweight by design, weighting in at just over four pounds and two and a half feet long, it provides less burden on the end user.
    • Coated in High Speed Black of Course!

    ORDERING OUTSIDE THE U.S. PLEASE CONTACT VIA EMAIL AT:  Chris@shieldspike.com OR CALL DIRECT (623)570-3929